Niagara Cutter CB230 Carbide End Mill, General Purpose, TiN Coated, 2 Flutes, Ball End, 1-1/2" Cutti

kalimat4 I will provide interesting information for you, you can get a Niagara Cutter CB230 Carbide End Mill, General Purpose, TiN Coated, 2 Flutes, Ball End, 1-1/2" Cutti at a very cheap price especially for This day. But before you continue reading, please see reviews about Niagara Cutter CB230 Carbide End Mill, General Purpose, TiN Coated, 2 Flutes, Ball End, 1-1/2" Cutti below

Features :

1. Carbide can run at higher speeds than high-speed steel.
2. Ball nose end mills (also called ball end) create contoured surfaces.
3. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material.
4. Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills.

Description

The Niagara Cutter CB230 TiN-coated carbide ball nose end mill provides the better chip-carrying capacity and increased support of two flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tools ball nose creates contoured surfaces where sharp corners are not required. The two flutes have better chip-carrying capacity than more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The 30-degree helix angle supports general-purpose applications. It balances lower angles strong cutting edge for difficult-to-machine materials with higher angles increased cutting action. The general-purpose TiN coating is suitable for a range of materials. It combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum. ) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is +0. 000 to -0. 002. The round shank accommodates a variety of holders. End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively.

Similar

• Niagara Cutter 55803 Carbide Square Nose End Mill, Inch, TiAlN Finish. 125" Cutting Diameter, 0. 125" Shank Diameter.
• Niagara Cutter C430 Carbide End Mill, General Purpose, TiN Coated.
• Niagara Cutter CB430 Carbide End Mill, General Purpose, TiN Coated.
• Niagara Cutter 85436 Carbide Square Nose End Mill, Inch, TiAlN Finish. 5" Overall Length, 0. 125" Cutting Diameter, 0. 125" Shank Diameter.

Find out more